Meet the Moblite7 Walksnail Racing Drone
Introducing the Happymodel Moblite7 Walksnail, an impressive 1S 75mm HD Whoop-style FPV racing drone boasting an ultra-lightweight frame and powerful performance. The Moblite7 is ideal for both beginners and experienced pilots, offering a thrilling and immersive flying experience. Its features include an updated V4 frame, GNB27 connector, Gemfan 1635-3 propellers, advanced flight controller, efficient motors, high-quality FPV camera, and compact VTX. Upgrade your flight game with this exceptional compact drone and soar to new heights.
Key Features and Specifications
Updated Design
Eliminating the need for 3D printing, the Moblite7 Walksnail now features a sleek GNB27 connector and V4 frame. The Gemfan 1635-3 propellers provide enhanced performance and efficiency. Note, the Lipo battery is NOT included in the package.
Compact and Lightweight
With a frame wheelbase of 75mm, this racing drone weighs only 33.5 grams without the battery. Its dimensions are 98mm x 98mm x 48mm, making it portable and easy to transport.
Futuristic Flight Controller
The SuperbeeF4 Lite ELRS/FRSKY flight controller features an STM32F411CEU6 MCU (100MHz, 512K FLASH), multiple sensor options (MPU-6000, ICM20689, or BMI270), and support for 1S Lipo or Lihv batteries. Additionally, it has built-in 5A(each) Blheli_S 4in1 ESC Dshot600, Betaflight OSD, SPI receivers, 5V 1A BEC, and voltage detection.
Powerful Onboard 4in1 ESC
The upgraded EFM8BB21 MCU supports a power supply of 1S LiPo/LiPo HV (2.8V~4.35V), providing a continuous current of 5A, and a peak current of 6A for 5 seconds. The ESC is programmable via BLHeliSuite and has a default protocol of DSHOT150, DSHOT300, or DSHOT600.
Integrated Receivers
The onboard SPI ExpressLRS 2.4GHz Receiver offers multiple packet rate options, including 25Hz, 50Hz, 150Hz, 250Hz, and 500Hz. Meanwhile, the SPI BUS Frsky D8/D16 2.4GHz Receiver is Frsky D8/D16 compatible and offers both 8-channel and 16-channel modes, with a range of 100m~200m without ground interference.
Efficient Motors and Propellers
Equipped with RS1002 20000KV motors and Gemfan 1610-2 bi-blades propellers, this drone guarantees powerful and efficient performance. The lightweight propellers weigh only 0.24g each and measure 40mm in diameter.
High-Quality FPV Camera and VTX
Featuring an Avatar nano camera with a 1/2.7” image sensor and 1080P/60fps resolution, you'll enjoy clear, crisp, and smooth footage. The Avatar mini 1S VTX module ensures reliable communication and supports Betaflight OSD, offering a latency of just 22ms on average. The package includes 1x Moblite7 V2 Walksnail FPV Drone, 1x Spare Canopy, 1x Propeller Disassemble Tool, and 1x Screwdriver.
Product Specifications
Flight controller
SuperbeeF4 Lite ELRS/FRSKY
|
SPI ELRS version Firmware target: CrazybeeF4SX1280
SPI FRSKY version Firmware target: CrazybeeF4FR
MCU:STM32F411CEU6 (100MHz, 512K FLASH)
Sensor: MPU-6000 or ICM20689 or BMI270(SPI connection)
Power supply: 1S Lipo Lihv battery input (DC 2.8V~4.35V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Betaflight OSD(SPI Control)
Built-in SPI Frsky/ExpressLRS receiver
Built-in 5V 1A BEC
Built-in voltage detection
|
Onboard 4in1 ESC
|
MCU upgraded to EFM8BB21
Power supply: 1S LiPo/LiPo HV (2.8v~4.35v)
Currents: 5A continuous peak 6A (5 seconds)
Support BLHeliSuite programmable
Factory firmware: O_H_5_REV16_8.HEX
Default protocol: DSHOT150/DSHOT300/DSHOT600
|
Onboard SPI ExpressLRS 2.4GHz Receiver
|
Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
RF Frequency: 2.4GHz
Telemetry output Power: <12dBm
Receiver protocol: SPI ExpressLRS
Could bind with ELRS V2.0 firmware TX module
|
Onboard Frsky SPI D8 /D16 2.4GHz Receiver
|
SPI BUS receiver Frsky D8/D16 compatible
Compatible Non EU transmitter D8 model and EU-LBT(Frsky_x_lbt)
Channels: 8ch or 16ch
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 100m~200m
Based on CC2500 RF module Compatible with Futaba S-FHSS , Redpine protocol
|
| Motor |
Model: RS1002 20000KV
Configu-ration:9N12P
Stator Diameter:10mm
Stator Length:2mm
Shaft Diameter:Φ1.5mm
Motor Dimension(Dia.*Len):Φ13.5mm*12.5mm
Weight(g):2.5g
No.of Cells(Lipo):1S only
|
Propeller Gemfan 1610-2 Bi-blades ( V1 )
|
Weight:0.24g
Material: PC
Pitch:1 inch
Props Dia:40mm
Center Hole Dia:1.5mm
|
| VTX |
Model: Avatar mini 1s module
Communication Frequency: 5.725-5.850 GHz
Transmitter Power(EIRP): FCC:<25.5dBm; CE:<14dBm; SRRC: <20dBm;MIC:<25dBm
l/o Interface: JST1.O*6(Power in)JST1.O*4(USB)
Mounting Holes: 25.5*25.5 mm
Dimensions: 33*33*6.5 mm
Storage: 8G
Recording: 1080p/720p
Weight: 6.8 g
Operating Temperature: -20-40℃
Channels: 8
Wide Power lnput: 3.1V-5V
Supported FC System: Betaflight
OSD: Canvas mode
Bitrate: 25mbps / 50mbps
Latency: Average delay 22ms
Antenna connector: IPEX
|
| FPV Camera |
Model: Avatar nano
lmage Sensor: 1/2.7”Inch
Resolution: 1080P/6Ofps,720P/120fps,72OP/6Ofps
Ratio: 16/9 4/3
Lens: 2.1mm
FOV 170°
Aperture: F2.0
Shutter: Rolling shutter
Min.Illumination: 0.001Lux
Weight: 3.5g
Dimensions: 14*14*17mm
Coaxial Cable: 45mm
|
Product Images
Free
3-7 Day
Tracked Delivery
Easy 30 Day Returns
